7009/7108/7015 Resistor Baths

Like all Fluke Calibration baths, these resistor baths have unbeatable stability and uniformity.

 

Three size options for any quantity of resistors

  • Three size options for any quantity of resistors
  • Stability to ±0.0007 °C
  • Independent high- and low-temperature cutout circuit
  • Minimal long-term drift

Regardless of the size and number of standard resistors you have to maintain, Fluke Calibration has a bath that will do the job for you. Choose one of the three models described here or call us for information on other sizes.

Like all Fluke Calibration baths, these resistor baths have unbeatable stability and uniformity. No other baths limit long-term and short-term drift—as well as gradients—better than these baths. Our proprietary controller senses temperature changes as small as 0.00001 °C. This controller is the industry’s best-selling temperature calibration controller for bath retrofits because it improves the stability of almost every other poorly performing bath. So why not buy the best to begin with?

Each bath can be delivered with any size resistor rack you want (a standard model is included with each bath).

7015

The 7015 has a 95-liter tank and a temperature range of 0 °C to 50 °C. It’s stable to ±0.0007 °C.

It has a one-piece stainless steel lid designed to drain spills and splashes back into the bath as you remove resistors. It has a large access opening to make handling large resistors, like the Thomas design standard resistors, easier. The tank has an electrically isolated resistor shelf.

This is truly a quality resistor bath, and it’s backed by our industry-leading service.

7009

This is a large bath with a tank 27½ inches long by 22 inches wide. It has a temperature range of 0 °C to 50 °C and a stability of ±0.0007 °C.

For a bath this size and with these specs, it is priced extremely well. The Model 7009’s large tank can handle many resistors of any size.

7108

This is the quietest resistor bath you’ve ever heard. The 7108 uses thermoelectric (Peltier) modules to provide heating and cooling over its range from 20 °C to 30 °C. Without a compressor, noise is dramatically reduced. Power requirements are also lower, so you save money running the bath and add less heat load to your lab.

With a 51-liter (13.2-gal) tank, the 7108 holds plenty of resistors. A large 14" x 14" (356 x 356 mm) access opening allows you to easily move resistors in and out of the bath. A resistor rack comes with each unit that fits across the bottom of the tank. Made from hard-anodized perforated aluminum, this rack maintains the necessary electrical isolation between your resistors.

 

 

 

Specifications

7015

7009

7108
Range 0 °C to 50 °C† 0 °C to 50 °C† 20 °C to 30 °C
Stability at 25 °C ±0.0007 °C (water)
±0.001 °C (mineral oil 5011)		 ±0.002 °C (water)
±0.004 °C (mineral oil 5011)
Uniformity ±0.003 °C at 25 °C (water)
±0.005 °C at 25 °C (mineral oil 5011)		 ±0.005 °C (water)
±0.008 °C (mineral oil 5011)
Temperature Setting Digital display with push-button data entry
Set-Point Resolution 0.002 °C; high-resolution mode, 0.00003 °C
Display Resolution 0.01 °C
Digital Setting Accuracy ±1 °C ±0.5 °C
Digital Setting Repeatability ±0.01 °C
Heaters 500 and 1000 Watts Peltier heating/cooling
Cooling Capacity 100 to 200 Watts 100 W in ambient 23 °C
Access Opening 699 x 279 mm (27.5 x 11 in) 699 x 559 mm (27.5 x 22 in) 356 x 356 mm (14 x 14 in)
Bath Chamber Dimensions (HxWxD) (unobstructed space) 699 x 279 x 330 mm
(27.5 x 11 x 13 in)		 669 x 559 x 330 mm
(27.5 x 22 x 13 in)		 356 x 203 x 355 mm
(14 x 8 x 14 in)
Depth 330 mm (13 in) 203 mm (8 in)
Wetted Parts 304 stainless steel Tank: 304 stainless steel
Resistor rack: hard-anodized, perforated aluminum
Safety Cutout Factory-set high temperature n/a
Power 115 VAC (±10 %), 60 Hz, 15 A or 230 VAC, 50 or 60 Hz, 8 A, specify 230 VAC (±10 %), 50 or 60 Hz, 12 A (specify frequency) 115 VAC (±10 %), 50/60 Hz, 3 A or 230 VAC (±10 %), 50/60 Hz, 1.6 A, specify
Volume 95 liters (25 gallons) 167 liters (44 gallons) 51 liters (13.2 gallons)
Weight 141 kg (310 lb.) 150 kg (330 lb.) 35 kg (75 lb.)
Size (HxWxD) 1219 x 1118 x 559 mm
(48 x 44 x 22 in)		 1092 x 1130 x 864 mm
(43 x 44.5 x 34 in)		 489 x 413 x 559 mm
(19.25 x 22 x 25 in)
Automation Package Interface-it software and RS-232 computer interface are included for setting the bath temperature via an external computer. For IEEE-488, add the 2001-IEEE.
†Although the 7015 and 7009 baths are capable of reaching higher temperatures, they are designed for use with standard resistors. Therefore, the soft cutout of the instrument has been set at the factory to 50°C to protect standard resistors placed in the bath.

 

 

Model Name

Description
7015 Resistor Bath
7009 Resistor Bath, high capacity
7108 Resistor Bath, Peltier-cooled, includes RS-232

Accessory Description
SC2-MRBA Silver Care Plan, 2 Yr Extended Warranty, Mid Range Baths
SC4-MRBA Silver Care Plan, 4 Yr Extended Warranty, Mid Range Baths

Accessories common to all models:

Accessory

Description
5011-18.9L Mineral Oil, 18.9 L (5 gal.)
5011-3.8L Mineral Oil, 3.8 L (1 gal.)
2001-IEEE IEEE-488 Interface
SC1-SPBA Silver Care Plan, 1-yr Extended Warranty, Special Application Baths

 

Request a quote - Shop

  • Any additional requirements? Please let us know.
  • This field is for validation purposes and should be left unchanged.

Related products

Call Now Button