718 Pressure Calibrator

The Fluke 718 pressure calibrator family (includes 4 models) provide a total pressure calibration solution for transmitters, gauges and switches.

 

The complete solution to pressure calibration

The 718 Pressure Calibrator provides a total pressure calibration solution for transmitters, gauges and switches. This compact pressure calibration solution is about a third of the size of comparable instruments and weighs just one kilogram (two pounds). The unique easy to clean pump helps protect the pump from damage and provides the ability to service the pump without disassembly, even in the field.

 

  • Pressure Source and Milliamp Measurement to calibrate and maintain almost any pressure device
  • Integrated pump is easily cleaned when accidently exposed to fluids that reduces cost of ownership and repairs and enables servicing the pump in the field
  • Error % calculation for quicker pass/fail decision making in the field
  • Best in class mA accuracy of 0.015% for better measurement confidence and workload coverage
  • Min/Max/Hold to capture changing measurements
  • Switch test feature for quicker and more accurate pressure switch testing
  • New 1 and 300 psi pressure ranges mean fewer extra tools required
  • 1, 30, 100 & 300 psi ranges now available

 

Specifications: 718 Pressure Calibrator

Technical Specifications
718 Series
Measure pressure (Internal sensor)
Accuracy 0.025% full scale
Functions Zero, min/max, hold, damp
Dry air, non-corrosives only
718 1G
Range -1 psi to +1 psi, -68.9 mbar to 68.9 mbar (-6.89 kPa to 6.89 kPa)
Resolution 0.0001 psi, 0.001 mbar, 0.0001 kPa
Over pressure 5x Full Scale
Functions Zero, Min, Max, Hold, Damp
718 30G
Range -12 psi to 30 psi, (-850 mbar to 2 bar, -85 to 206.84 kPa)
Resolution 0.001 psi, 0.1 mbar, 0.01 kPa
Over pressure 5x Full Scale
Functions Zero, Min, Max, Hold, Damp
718 100G
Range -12 psi to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa)
Resolution 0.01 psi, 0.1 mbar, 0.01 kPa
Over pressure 2x Full Scale
Functions Zero, Min, Max, Hold, Damp
718 300G
Range -12 psi to 300 psi, (-850 mbar to 20 bar, -85 to 2068.42 kPa)
Resolution 0.01 psi, 1 mbar, 0.1 kPa
Over pressure 375 psi 25 bar
Functions Zero, Min, Max, Hold, Damp
718 series via 700 Series Pressure Modules
Range 29 pressure modules, 0 – 1 inH20 to 10,000 psi, 2.5 mbar to 700 bar. Over pressure per pressure module specs
Resolution Per pressure module specs
Accuracy To 0.025% of full span, per pressure module specs
Functions Zero, Min, Max, Hold, Damp
Media compatibility per pressure module specs
718 Series Via Built in Pump
Range -12 psi or -850 mbar to full scale Supported Pressure Units; psi, inH20 (4°C), inH20 (20°C), cmH20 (4°C), cmH20 (20°C), bar, mbar, kPa, inHg, mmHg, kg/cm
Loop power range 24 V DC
Accuracy ±10%
Drive; 20 mA into 1000 Ω for battery > 6.8 V; 700 Ω for battery 5.8 to 6.8 V
mA Measure
Range 0 mA to 24 mA
Resolution 0.001 mA
Accuracy 0.015% + 1 count
General Specifications
Maximum voltage 30 volts (non-operating)
Temperature -40°C to 60°C
Operating temperature -10°C to 55°C
Relative humidity 95% (10°C to 30°C); 75% (30°C to 40°C); 45% (40°C to 50°C); 35% (50°C to 55°C)
Operating altitude 3,000 M max
Shock 1 M drop test
Vibration Random, 2 g, 5 Hz – 500 Hz
Safety CSA C22.2 No. 1010.1: 1992
EMC EN50082-1: 1992 and EN55022: 1994 Class B
Size 216 x 94 x 66 mm (8.50 x 3.72 x 2.60 in)
Weight 992 g (35 oz)
Power, battery life 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718
Battery life 4 to 20 hours typical, depending on functions used
Warranty Three years (one year on pressure pump in Fluke 718)
Display LCD, 5 digit pressure and current simultaneous
For use with non-corrosive gasses

Models: 718 Pressure Calibrator

718 1G
718 1G Pressure Calibrator
-1 to 1 psi, (-68.9 mbar to 68.9 mbar, -6.89 to 6.89 kPa)
 

Includes:

  • Protective Yellow Holster with test lead storage
  • Instructions Sheet (14 languages)
  • Test Leads and Alligator Clip
  • Two 9V alkaline batteries
  • NIST - Traceable calibration report and data
718 30G
718 30G Pressure Calibrator
-12 psi to 30 psi, (-850 mbar to 2 bar, -85 to 206.84 kPa)
 
718 100G
718 100G Pressure Calibrator
-12 psi to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa)
 
718 300G
718 300G Pressure Calibrator
-12 psi to 300 psi, (-850 mbar to 20 bar, -85 to 2068.42 kPa )

Request a quote - Shop

  • Any additional requirements? Please let us know.
  • This field is for validation purposes and should be left unchanged.

Call Now Button