7350 Pneumatic High Pressure Controller
The Model 7350 high pressure pneumatic controller provides a safe, easy to use and effective means of automating high pressure test and calibration
General |
|
| Standard Pressure Ranges (FS, bara) | 6000, 10,000 psia (415, 700 bara) |
| Tare Mode | Tare mode included for gauge calibrations |
| Display | TFT, VGA, active matrix, 6.4 in (162.5 mm) 640 x 480 resolution, 65,000 colors |
| Electrical Power | 110 or 220 VAC (±18%), 50/60 Hz, single phase |
| Operating Temperature | 41°F to 122°F (5°C to 50°C) |
| Storage Temperature | -4°F to 158°F (-20°C to 70°C) |
| Humidity | 5 to 95% relative humidity, non-condensing |
| Dimensions (h x w x d) | 17 in x 19 in x 24 in (43 cm x 49 cm x 61 cm) |
| Weight | 120 lb (54.5 kg) |
Performance |
|
| Precision | 0.01% of range; to 10,000 psi (700 bar) |
| Stability | 0.01% of range, per year |
| Control Stability | 0.007% maximum FS for load volume 3 to 35 in3 (7.5 to 89 cm3); control low limit is 10% of maximum FS pressure |
| Warm Up Time | 30 minutes, may be left on indefinitely |
| Pressure Medium | Dry, clean air or nitrogen |
| Supply Pressure | 10% above FS pressure range (may require optional external gas booster system), 100 to 110 psi (7 to 7.5 bar) industrial grade (shop) air for controller operation |
Pneumatics |
|
| Pneumatics Ports | Test port: 1/8 in NPT Supply pressure port: 1/8 in NPT Air supply: 1/4 in NPT |
| Overpressure Protection | Test port relief valve set at 110% FS Gas supply port set at 120% FS Software limits (set by user) |
Communications |
|
| Communications | RS232 and IEEE-488 Syntax: SCPI Fluke Calibration Series 6000 and Druck DPI 510 emulation |
| Drivers | LabVIEW driver available MET/CAL® driver available Intecal software available |
Calibration |
|
| Calibration |
A calibration report providing traceability to the National Institute of Standards and Technology (NIST) is provided with each instrument. NVLAP accredited calibration to ISO/IEC 17025 is available as an option. Recommended calibration interval is one year. |
Options |
|
| Options | Triple scale Intecal software |
Model Name |
Description |
|---|---|
| 7350 | Pneumatic High Pressure Controller |
