Minerva MNR 502 Mass Sets

Mass sets for Wika CPB6000/Desgranges & Huot Type 5000 and Fluke PG7000 piston gauges.

A complete mass set includes main masses of 10 kg or 5 kg each, fractionary masses in 5-2-2-1 progression from 0.5 kg to 0.1 kg and a trim mass set with masses from 50 g to 0.01 g.

  • Reduced investment
  • Plug & play solution
  • Provided with ISO/IEC 17025 accredited calibration certificate

The mass set composition is such, that any desired mass value within the mass set range can be loaded within 0.01 g.

All main masses are machined from solid, non-magnetic stainless steel and adjusted to their nominal values in the mass without cavities or trimming hardware which can reduce mass stability over time.

General specifications

Masses (All masses are delivered in molded, reusable transit cases with custom inserts)
Masses > 50 g  Material  304L non-magnetic stainless steel
 Adjustment tolerance  ± 20 ppm of nominal value
 Measurement uncertainty in certificate  11 ppm + 0,05 mg (k=2)
 Traceability of measured values  The masses are delivered with an ISO/IEC 17025 certificate which assures traceability to (inter)national standards


Mass set compatibility

Designator Nominal total mass D&H 5200 + 5300 Wika CPB6000 PG7102 PG7302 PG7601
MNR-502-035-4.0 35 kg

MNR-502-035-4.5 35 kg  
MNR-502-040 40 kg  
MNR-502-045 45 kg  
MNR-502-055 55 kg  
MNR-502-080 80 kg  
MNR-502-100 100 kg  

 

 

Mass set definitions and ordering details

Ordering code Nominal total mass Mass set composition
10 kg 5 kg 2 kg 1 kg 0.5 kg 0.2 kg 0.1 kg Trim set 50 g to 0.1 g Make up mass¹ Total mass incl. piston + carrier
MNR-502-035-4.0 35 kg 5 2 1 1 2 1 1 1 [4.5 kg] 36 kg
MNR-502-035-4.5 35 kg 5 2 1 1 2 1 1 1 [4 kg ] 36 kg
MNR-502-040 40 kg 2 1 2 1 1 2 1 1 1 [9 kg ] 41 kg
MNR-502-045 45 kg 2 2 2 1 1 2 1 1 1 [9 kg] 46 kg
MNR-502-055 55 kg 3 2 2 1 1 2 1 1 1 [9 kg ] 56 kg
MNR-502-080 80 kg 6 1 2 1 1 2 1 1 1 [9 kg] 81 kg
MNR-502-100 100 kg 8 1 2 1 1 2 1 1 1 [9 kg] 101 kg

Note: The piston and the mass loading bell are not included in the mass set. Piston-cylinders are ordered separately and the mass loading bell is delivered with the PG7000 platform.
1: The make up mass is the first main mass loaded on the piston and bell to reach an even increment of 5 kg or 10 kg. 2 PC-7100/7600-10, TC with a tungsten carbide piston has a piston mass of 0.5 kg.

Request a quote - Shop

  • Any additional requirements? Please let us know.
  • This field is for validation purposes and should be left unchanged.

Call Now Button