6517B Electrometer/High Resistance Meter
The 5½-digit Model 6517B Electrometer/High Resistance Meter offers accuracy and sensitivity specifications unmatched by any other meter of this type.
In our effort to bring our customers the highest level of precision measurement capabilities, Fluke Calibration is proud to offer these precision metrology grade products from Keithley Instruments. Renowned as a leader in low-level precision electrical measurements, these selected Keithley products present an opportunity to help you further reduce uncertainties in your lab.
The 5½-digit Model 6517B Electrometer/High Resistance Meter offers accuracy and sensitivity specifications unmatched by any other meter of this type. It also offers a variety of features that simplifies measuring high resistances and the resistivity of insulating materials. With reading rates of up to 425 readings/ second, the Model 6517B is also significantly faster than competitive electrometers, so it offers a quick, easy way to measure low-level currents.
- Measures resistances to 1016 Ω
- 1 fA – 20 mA current measurement range
- <20 µV burden voltage on lowest current ranges
- 200 TΩ input impedance
- <3 fA bias current
- Up to 425 rdgs/s
- 0.75 fA p-p noise
- Built-in ±1 kV voltage source
- Unique voltage reversal method for high resistance measurements
Summary specifications |
||
| Display | VFD | |
| Digit Resolution | 5.5 digits | |
| V DC | Ranges: | 2V to 200V |
| Min. resolution: | 10 mvolts | |
| Best accuracy: | 0.025 % rdg + 3 counts | |
| Input resistance: | >200T Ohms in parallel with 20 pf | |
| Amps | Ranges: | 20 pA to 20 mA |
| Min. resolution: | 100 aA | |
| Best accuracy: | 0.1 % of rdg + 5 counts | |
| Input voltage burden | < 20 µVolts to < 5 mV | |
| Input bias current | <3 fA | |
| Input bias current noise | <750 micro amps p-p | |
| Ohms (Normal Method) | Ranges: | 2 M Ohms to 200 T Ohms |
| Min. resolution: | 10 Ohms | |
| Best accuracy: | 0.125% of rdg + 1 count | |
| Auto voltage source | 40 V, 400 V | |
| Coulombs | Ranges: | 100V, 1000V |
| Min. resolution: | 5 mV, 50mV | |
| Best accuracy: | 0.4% of rdg + 5 counts | |
| Voltage Source | Ranges: | 100V, 1000V |
| Min. resolution: | 5 mV, 50mV | |
| Best accuracy: | 0.15% setting + 10mV offset | |
| Thermocouple | Type: | K |
| Range: | -25 degrees C to 150 degrees C | |
| Accuracy | 0.3% of rdg+ 1.5 degrees C | |
| Humidity | Range: | 0 to 100 % |
| Accuracy | 0.3% of rdg + 0.3 % RH | |
| 2V Analog Output | 2 V for full range input | |
| Reading Storage | 50,000 | |
| Calibration Documentation | Traceable calibration report included (no data); Z540.1 or 17025 accredited report optional | |
| Remote interface | GPIB (IEEE-488.2) and RS-232C SCPI (Standard Commands for Programmable Instruments) |
*For additional detail of above summary specifications see product data sheet.
Accessory |
Description |
|---|---|
| 237-ALG-2 | Low-Noise Triax Input Cable |
| 8607 | 1 kV Source Banana Test Cables |
| 6517-TP | Thermocouple Bead Probe |
| CS-1305 | Interlock Connector |
| 7078-TRX-3 | Low-Noise Triax Cable |
| 7078-TRX-10 | Low-Noise Triax Cable |
| 7078-TRX-20 | Low-Noise Triax Cable |
| 6517-RH | Humidity Probe |
| 8009 | Resistivity Test Chamber |
| 4288-1 | Single, Fixed Rack Mount Kit |
| 4288-2 | Dual, Fixed Rack Mount Kit |
Brochures
Data sheets
Specifications
Instruction sheets
