Tektronix TDS3000-Series calibration and repair

Home → Calibration Service → Electrical calibration → Tektronix → Tektronix TDS3000-Series calibration and repair

Have your Tektronix equipment calibrated in the ISO/IEC 17025 accredited lab!

Minerva is specialized in repair and calibration services of Tektronix instruments. These Tektronix instruments are calibrated in a ISO/IEC 17025 accredited calibration lab.

The calibration is performed by calibration technicians. We have more then 30 years of experience in calibrating instruments. In short, your Tektronix instrument is taken good care off! We focus on a fast lead time and extremely high standard of our service.

Tektronix TDS3000-Series Digital Phosphor Oscilloscope

Features & Benefits

500 MHz, 300 MHz, and 100 MHz Bandwidths
Sample Rates up to 5 GS/s
2 or 4 Channels
Full VGA Color LCD on all Models
Built-in Floppy Disk Drive For Easy Storage and Documentation
21 Automatic Measurements
Centronics Port Standard on all Models for Quick, Convenient Hardcopies
9-bit Vertical Resolution
Multi-Language User Interface
QuickMenu User Interface Mode for Quick, Easy Operation
Optional Modules for RS-232, GPIB, LAN or VGA Communication Ports
Advanced Triggers, such as, Glitch, Width, and Logic Standard on 4 Channel Models
Telecommunications Mask Testing (TMT)
Fast Fourier Transform (FFT) for Frequency and Harmonic Analysis Standard on 4 Channel Models
Extended Video Application Module
Support for Active Probes, Differential Probes, and Current Probes that Provide Automatic Scaling and Units

TDS3000 Series Electrical Characteristics

	TDS3012	TDS3032	TDS3052	TDS3014	TDS3034	TDS3054
Bandwidth	100 MHz	300 MHz	500 MHz	100 MHz	300 MHz	500 MHz
Channels	2	2	2	4	4	4
Sample Rate on Each Channel	1.25 GS/s	2.5 GS/s	5 GS/s	1.25 GS/s	2.5 GS/s	5 GS/s
Maximum Record Length	10K points on all models
Vertical Resolution	9–bits on all models
Vertical Sensitivity (/div)	1 mV-10 V on all models
Vertical Accuracy	±2% on all models^*1
Max Input Voltage (1 megohm)	150V RMS CAT I on all models
Position Range	±5 div on all models
BW Limit	20 MHz	20, 150 MHz	20, 150 MHz	20 MHz	20, 150 MHz	20, 150 MHz
Input Coupling	AC, DC, GND on all models
Input Impedance Selections	1 megaohm in parallel with 13 pF, or 50 ohm
Time Base:
Range (/div)	4 ns – 10 s/div	2 ns – 10 s/div	1 ns – 10 s/div	4 ns – 10 s/div	2 ns – 10 s/div	1 ns – 10 s/div
Accuracy	200 ppm	200 ppm	200 ppm	200 ppm	200 ppm	200 ppm
Display Monitor	Color LCD

^*1 Derated at 0.07%/°C for temperatures above +28°C and below +18°C.

Back to Tektronix overview