Agilent 83430A calibration and repair
Have your Agilent technologies equipment calibrated in the ISO/IEC 17025 accredited lab!
Minerva is specialized in repair and calibration services of Agilent instruments. These Agilent instruments are calibrated in a ISO/IEC 17025 accredited calibration lab.
The calibration is performed by calibration technicians. We have more then 30 years of experience in calibrating Agilent instruments. In short, your Agilent instrument is taken good care off! We focus on a fast lead time and extremely high standard of our service.
Agilent 83430A-155 Lightwave Transmitter
Specifications
– Input Modulation
Digital AC Coupled
- Maximum Input Level: 2 V pk-pk
- Bit Rate: 50 to 2500 Mb/s
- Pulse Pattern: 40 to 60% ones density
- Polarity: Non-inverting
- Input Level: 0.7 to 1.5 V pk-pk
- Digital Threshold Adjustment Range: ±0.2 V
- Impedance: 50 Ω
- Input Return Loss: 0.1 to 1 GHz 12 dB – 1 to 2 GHz 8.5dB – 2 to 2.5 GHz 6 dB
Digital DC Coupled
- Maximum Input Level: –4.5 to 0 V
- Bit Rate: DC to 2500 Mb/s
- Pulse Pattern: 0 to 100% ones density
- Polarity: Non-inverting
- Input Level: –1.7 V low, –0.9 V high (ECL levels)
- Digital Threshold Adjustment Range: ±0.2 V
- Impedance: 50 Ω to –2 V DC
- Input Return Loss: 0.1 to 1 GHz 12 dB – 1 to 2 GHz 8.5dB – 2 to 2.5 GHz 6 dB
Analog AC Coupled
- Maximum Input Level: 2 V pk-pk
- Bit Rate: 0.1 to 2500 MHz
- Polarity: Inverting
- Input Level: 2 V pk-pk maximum
- Impedance: 50 Ω
- Input Return Loss: 0.1 to 1 GHz 12 dB – 1 to 2 GHz 9 dB – 2 to 2.5 GHz 6 dB
Optical Output
- Center Wavelength: 1550 ±1 nm
- Wavelength Adjustment Range: ±1.25 nm (±1.8 nm typical)
- Extinction Ratio: 10 dB ±1 dB
- Bias/Extinction Ratio Adjustment Range: from less than 8.2 dB to greater than 13 dB
- Peak Coupled Power:(Digital mode): 1.3 mW minimum (+ 1 dBm)
- Average Coupled Power: (Analog mode): 0.63 mW minimum (–2 .0 dBm)
- Output Fiber: 9/125 µm, single-mode
Optical Connectors sold separately:
- 81000 FI – FC/PC
- 81000 KI – SC PC/APC