Agilent 461A calibration and repair
Have your Agilent technologies equipment calibrated in the ISO/IEC 17025 accredited lab!
Minerva is specialized in repair and calibration services of Agilent instruments. These Agilent instruments are calibrated in a ISO/IEC 17025 accredited calibration lab.
The calibration is performed by calibration technicians. We have more then 30 years of experience in calibrating Agilent instruments. In short, your Agilent instrument is taken good care off! We focus on a fast lead time and extremely high standard of our service.
Agilent 461A Wide Band Amplifier
The Agilent 461A Wide Band Amplifier is used primarily where flatness is important. The Models 461A and 426A Amplifiers are essentially identical. In Model 462A some of the component values are changed slightly to improve its pulse response.
Features:
- Frequency Range 1 kHz to 150 MHz
- Frequency Response +/-1 dB, 1 kHz to 150 MHz when operating into 50 ohms resistive Load (500 kHz reference)
- Gain at 500 KHz 40 dB +/-0.5 dB; pr 20 DB +/-1.0 dB, selected by front panel switch (inverting)
- Input Impedance Nominal 50 ohms
- Maximum Input 1-volt RMS or 2 volts p-p pulse
- Maximum dc Output +/-2 Volts
- Maximum Output 1/2 volt RMS into 50 ohms resistive load
- Equivalent Wideband Input Noise Level Less than 40V, in 40 dB position when loaded with 50Ω
- Distortion Less than 5% at maximum output and rated load
- Overload Recovery Less than 1 microsecond for 10 times overload
- Power Supply 115 or 230V +/-10%, 48 to 440 Hz, 5 watts
- Dimensions 5 1/8 in. (13cm) wide, 3 in. (7.6cm) high, 11in. (27.9 cm) deep
- +/-1dB Frequency Response
