Tektronix TCP312 calibration and repair

Home → Calibration Service → Electrical calibration → Tektronix → Tektronix TCP312 calibration and repair

Have your Tektronix equipment calibrated in the ISO/IEC 17025 accredited lab!

Minerva is specialized in repair and calibration services of Tektronix instruments. These Tektronix instruments are calibrated in a ISO/IEC 17025 accredited calibration lab.

The calibration is performed by calibration technicians. We have more then 30 years of experience in calibrating instruments. In short, your Tektronix instrument is taken good care off! We focus on a fast lead time and extremely high standard of our service.

Tektronix TCP312 AC/DC Current Measurement System

The TCP300 and TCP400 Series AC/DC current measurement family is a highly advanced current measurement system for today’s current measurement needs. When connected to Tektronix oscilloscopes with TEKPROBE Level II, TekConnect (w/ TCA-BNC), or TekVPI (w/ TPA-BNC) interfaces, current measurements and calculations are simple and easy.

Key performance specifications

AC/DC measurement capabilities

DC – 100 MHz, Current Probe Amplifier (TCPA300) uses:
- DC – 100 MHz, 30 A DC (TCP312A)
- DC – 50 MHz, 50 A DC (TCP305A)
- DC – 15 MHz, 150 A DC (TCP303)
DC – 50 MHz, Current Probe Amplifier (TCPA400) Uses:
- DC – 2 MHz, 750 A DC ¹ (TCP404XL) (500 A DC Continuous)

Key features

Automatic scaling and units ² – Oscilloscope on-screen readout of magnitude and amps reduces measurement errors with no more hand calculations
AC/DC input coupling
Low insertion impedance reduces device under test loading
Split-core construction allows easy circuit connection
Status indicators provide visual operating status and notification of potential error conditions – degauss, probe open, overload, not terminated into 50 Ω, noncompatible probe type
Low DC drift and noise allows improved low-level current measurements
3rd party safety certification

Applications

Development and analysis solutions for designers, installers, and service personnel in telecom, data comm, computer, and semiconductor power electronics environments for:
- Power supplies (switching and linear)
- Semiconductor devices (SCRs, IGBTs, MOSFETs, CMOS, BJTs)
- Power inverters/converters
- Electronic ballasts
- Industrial/consumer electronics
- Mobile communications (phone, satellite, relay stations)
- Motor drives
- Transportation systems (electronic vehicles, electric trains, locomotives, avionics)

Meets today’s AC/DC current measurement applications

The TCPA300 amplifier, when used with TCP312A, TCP305A, or TCP303 probes, provides a wide range of current measurement capability and spans the gap between low-level milliamp measurements to very high current levels. These three probes provide current measurement capabilities of 30 A, 50 A, and 150 A DC continuous. For even higher current levels, the TCPA400 amplifier with the TCP404XL current probe measures 500 A DC continuous and 750 A DC continuous, derated with duty cycle.

Higher-frequency performance is available with the TCP312A w/TCPA300 providing ≥100 MHz bandwidth and a maximum current of 30 A DC.

Back to Tektronix overview