Tektronix AM503 calibration and repair

Home → Calibration Service → Electrical calibration → Tektronix → Tektronix AM503 calibration and repair

Have your Tektronix equipment calibrated in the ISO/IEC 17025 accredited lab!

Minerva is specialized in repair and calibration services of Tektronix instruments. These Tektronix instruments are calibrated in a ISO/IEC 17025 accredited calibration lab.

The calibration is performed by calibration technicians. We have more then 30 years of experience in calibrating instruments. In short, your Tektronix instrument is taken good care off! We focus on a fast lead time and extremely high standard of our service.

Tektronix AM503 Probe amplifier plug-in

The AM503, AM503A, AM503B, AM5030 and 11A16 use the same current probe input connector, an Amphenol 165-12 connector. It contains pins for hall element and transformer connections, lock detection, probe degaussing, and probe type encoding.

Later facelift versions AM503A and AM503B have digital readout of deflection factor.

Key Specifications

Bandwidth	A6302: DC to 50 MHz A6312: DC to 100 MHz A6303: DC to 15 MHz A6304XL: DC to 2 MHz (AM503B only)
Sensitivity	A6302, A6302XL, A6312: 1 mA/Div to 5 A/Div A6303, A6303XL: 10 mA/Div to 50 A/Div
Range	A6302: max. 20 A continuous, 50 A peak A6303: max. 100 A continuous, 500 A peak A6304XL: max. 500 A continuous, 700 A peak
Output	Into 50 Ω Scope, Input Set to 10 mV/div
Power	17 W
Compatible probes	A6302 (20/100 A, DC-50 MHz) A6312 (20/100 A, DC-100 MHz) A6303 (100/500 A, DC-15 MHz) CT4 with A6302 or A6312 (2000/20000 A)

Back to Tektronix overview